Setting anchors without the need to clean out the drill hole

Fischer FHB II

Revolutionary fischer Highbond Anchor FHB II

Anchoring extreme loads safely in cracked and non-cracked concrete – that's the world of the fischer Highbond system FHB II, the resin anchor which is now even more effective: combined with the resin cartridges FHB II-P and FHB II-PF HIGH SPEED, the Highbond turns into the world's fastest resin anchor. Why? There is no need to clean out the drill hole.

The advantages of this innovation have direct and practical effects on the craftsmen's work: as much as 40 percent less time from setting the drill hole to setting the anchor, no need for deeper drilling, no compacting the drill dust, no vacuuming, no need for special drills, no spoil dust in the air. What's more - there is no need for extensive cleaning or special equipment such as reamers or vacuum cleaners.

 

Anchor Fischer FHB II

 

The extremely fast processing is matched by an extremely short curing time: combined with the rapidly setting cartridge FHB II-PF HIGH SPEED, the anchor can be fully loaded at 20°C after just two minutes, making the fischer Highbond FHB II the most powerful and fastest fixing system in the heavy duty sector. More info...

Another strength of this heavy duty anchor is its adaptability: depending on the anchoring task and the number of fixing points, the user is free to choose between the resin cartridges FHB II-P and FHB II-PF HIGH SPEED and the injection resin FIS HB. Matching these cartridges are the two anchor stud types FHB II-A L and FHB II-A S. This results in four different embedment depths per diameter which can be used in variable combinations and so delivers the best possible solutions at any time.

Unlike some rival products, the fischer Highbond FHB II can also be used in water-filled drill holes. Also, the sizes ranging from M 8 to M 24 guarantee that the user always has the right anchor at hand.

 

The old system with the cleaning out the drill hole.

 

box1

News

  • 12 May 2015

    Anchor Volume Estimator

    This app quickly calculates the number of cartridges of  Anchoring Adhesive necessary to complete your specific installation.

  • 03 Jan 2014

    Professional brickwork restoration

    The VBS-M is approved for application in the brick center as well in the mortar joints of the brickwork. It is especially suitable for restoration in which the insulation system is post applied to the brickwork.

  • 03 Jan 2014

    Without the need to clean out

    The advantages of this innovation have direct and practical effects on the craftsmen's work: as much as 40 percent less time from setting the drill hole to setting the anchor

archive